Amd’s integrated graphics in the 13 should run flight sims. Edit: source: have a 13 and play flightgear maxed out. Msft fs should run easily on low or and probably will be fine on medium.

It’s the first gen hinges people complain about. They were inconsistent and some were very flimsy.

this is a file permission issue, nothing to do with LUKS. The solution should be to access the files as root. You could use the command “Sudo chmod a+rwx /path/to/drive” to set completely accessible file permissions, which is not a best practice typically, but would be fine here since the drive’s encrypted.

joplin

I would recommend fedora with kde. Kde is my go to desktop recommendation, and it is (iirc) developed a lot in germany, so support for that should be good.

I have an arc for transcoding, and I had to set the device to /dev/dri without the renderD128 part. If I were you, I would just use the 2060. If it’s there for llama or something I’d still try it and see how it does doing both at once, as it should be separate parts of the gpu handling that.

i don’t know much bash, so anyone else who responds is probably more right, but since no one has responded, here’s my 2 cents: it appears to be a script to run all scripts in .bashrc.d. That would be similar to how some apps will let you separate a configuration file into multiple files in a directory conf.d. If there is no .bashrc.d, then it should be fine.

Cool, thanks.

Did you have to use a display to flash? Some of them don’t seem to have a display output and I don’t know if that will be an issue. The apple thing concerns me. There are a few macs and iPhones on the network, but the macs are m1, and the oldest iphone would be a 12. Do you think that would be an issue? Also, which R3 router are you using specifically?

They said they want a local backup so they don’t have to redownload because bandwidth is expensive. I think a RAID makes more sense. I also don’t think btrfs is a great idea for a boat. Power failures will probably be somewhat common, and btrfs is not the most stable, so I don’t think I would trust it in weird conditions. Documentation is definitely a great idea though.

For hardware, I would go with sata ssds for storage. I also would recommend a separate boot drive as it makes re installing without loosing data a breeze. You could go with a new processor from intel or amd, and make sure it has onboard graphics. You should also go into the BIOS, enable xmp (always do that. It’s free performance), and look for power saving settings. You could go for arm, but most arm computers lack expansion options and that can mean you use USB for drives which is unreliable. I think dc atx power supplies are a thing, but I know nothing about them. I would recommend doing ext4 and a raid, ideally 6 or 10. That will give you stability (from filesystem issues) and good reliability. I know RAID is not a backup, but in this case it may be what you want. RAID is for uptime, and it would be able to usually buy you enough time to finish your trip, or you could even have spare drives onboard and fix it while you’re out in like 10 minutes. Also, I would highly recommend researching how to power it well. Starting an engine can mess with the power and could fry a computer. I don’t know if a dc ups is a thing, but if it is, get it.

For software, use whatever you want, mostly. I always use debian for servers, but proxmox would probably be fine. You can use powertop to make sure it runs efficiently.

You can. I am lucky enough to not have been hacked after about a year of this, and I use a server in the living room. There are plenty of guides online for securing a server. Use common sense, and also look up threat modeling. You can also start hosting things locally and only host to the interwebs once you learn a little more. Basically, the idea that you need cloudflare and aws to not get hacked is because of misleading marketing.

I agree, though I wouldn’t blame the article. If it is insecure, you shouldn’t be using it unless it is set up to allow you to run a real os on it.

Openhab is a project like HomeAssistant. Both are basically websites that offer pre made smart home functionaility and can run on your own server. Openhab doesn’t set a password by default (iirc), and when people expose it to the internet they end up with random bored people in another country somewhere flipping their lights on and off or adjusting their thermostat, though they could also get hacked. The openhab example was one of what not to do. I could have been more clear about that.

Security is an issue that people in this community are fairly opinionated on. Try to build up a practical knowledge of every tool you use (like tools for remotely managing your server). Think about how much access that tool gives you, and how easy it is to get. Ssh gets you basically full access to the system, except for bios level settings and things, but it is generally quite secure, and you can use keys instead of passwords. Cockpit, a remote management tool you can access from your browser, offers you a full terminal, so functionally the same access as ssh. However, hackers nearly got a back door into openssh (ssh is the protocol, openssh is the software on linux that implements that protocol), and cockpit is much less thoroughly looked at. Also cockpit doesn’t let you use keys.

You’re website will be static, which decreases the complexity and makes it easier to make it secure, so don’t worry too much. Here are some links that might be useful: https://www.digitalocean.com/community/tutorials/how-to-configure-ssh-key-based-authentication-on-a-linux-server

https://www.cyberciti.biz/tips/linux-security.html (this one seems to be geared more towards enterprise stuff, so not all of it is relevant, but a decent amount is.)

Edit: This one is good too. I recommend at least skimming it before the one above this. It will help you figure out which of the points in the link above are worth paying much attention to. https://owasp.org/www-community/Threat_Modeling

It sounds like you’re on the right track. As long as you aren’t hosting anything too important, just go for it. The only thing to keep in mind is security, which in your case should be fairly simple.

1. Use common sense: if you never have to enter a password or have a security key to access something, neither does a hacker. You would be amazed how many people host their openhab instances to the internet with no passwords.
2. Use ssh keys and disable passwords. Ssh keys are sort of like giant passwords that sit in a file and you never have to type in. It is counter intuitive, but it is more secure. A giant key is harder to guess than a password. You can also encrypt your key so you need the key and a password, this is useful for laptops which could be stolen.

For how to learn simple html and css, w3schools is your friend. You can learn all the random stuff people become extremely opinionated on eventually, but don’t get overwhelmed by all of it and just do what works for you.

Sorry to see you got downvoted for saying something that Reddit did better than Lemmy. I think a lot (though probably not the majority) of lemmings as well as people invoiced in open source can’t take criticism, especially of an open source project they care about. It is unfortunate as it negates a lot of the benefits of open source / free software.

I’m on a new domain now anyway. I will be more careful on this one, but I suspect they just didn’t look into it. I do really appreciate that you seem to be both knowledgeable and not an asshole. That seems to be a rare combination to find in this thread.

I kept it up for more than a year. By friends I mean like 3 people I know in real fucking life, and I made them all set secure passwords. Way to assume the worst about people, it is a very healthy attitude to have.

No, I’m in that category too lol.

Wow code with actual comments!!! Amazing!