That’s a weird comparison to make. The Aptera is smaller and uses different materials.
Afaik it’s going to be classified as a motorcycle in many states in the USA, but they’re still aiming for a high rating. I know they have crumple zones and a safety cell made from composites akin to F1 cars.
Whether what they’re planning will be enough, we’ll only know for sure once they test it.
The math works quite well as long as the information is accurate.
Of course things can always turn up to be different in the end product.
But from the information we have now, ~4 hours of good sunlight conditions will be enough for 43 miles.
The body weighs around 360kg, with a 60kwh battery it supposedly weighs around 800kg (the smallest and lightest option is 25kwh), with a drag coefficient of 0.13.
In comparison to some of the most efficient cars - the Hyundai Ioniq 6 is around 1,860kg with a drag coefficient of 0.21. Tesla Model 3 is around 1760kg with a drag coefficient of 0.219.
It’s going to be a whole lot more efficient than the average car just based on these numbers.
Now it depends on how much of the car’s surface will be covered by the solar panel and what’s the panel’s efficiency.
Or 43 miles in Aptera’s case
Just a rule of thumb for the future, don’t use a DRAMless QLC SSD as an OS drive.
Or even just a QLC SSD.
Newmaxx has a spreadsheet with details and recommendations - https://borecraft.com/
I’ve also been thinking of getting the NM790. Just take into account it has no DRAM.
deleted by creator
Yup.
Tailscale has some documentation about it, and also a bunch of examples (And apparently one specific to Immich).
Since you already got some replies, a bit of a different approach would be to set those services up using Docker and having Tailscale as a sidecar to each one of those.
You will then be able to access each one as a seperate device. immich.*.ts.net etc.
And in general I didn’t expect to see praise for a group that has “A Curse Upon the Jews” as part of their official slogan.
Neat! Glad to hear
Yeah they’ve done a good job with their documentation.
I was tempted by it several times already to try some features I didn’t even consider using.