Bottom, these stairs have a rounded lip to make them compliant with rise over run requirements in limited space.
Yes
Top. Stairs aren’t that tall.
While I’m not 100% certain it’s not just confusing perspective, it does appear that the slope rise is shorter than the run, suggesting that this is from the top of the stairs.
Nice catch. The carpet wear corroborates this.
I think the railing gives it away.
Yeah, that too.
The shadow under the matress
Bottom. Angle isn’t right to be the top.
Top the railing gives it away
And if you actually think for a moment you realize nobody carpets vertical parts of the steps
Edit: It doesn’t matter, the mattress is making an impossible shape/bend… It’s definitely AI generated… Even if it was two separate mattresses, it still wouldn’t make sense…
Foam mattress? Broken mattress?
My mattress easily bends like that. Most modern ones do
Plot twist: Stuck in the middle.
bottom, as we only can see the treads not the risers (that small inset underneath a step).
And you can see the wear on the treads. plus the handrail mount in the top left would be at a very inconvenient height if we were looking from the bottom up
The handrail argument doesn’t make any sense. It would be at the same height regardless of direction.
Also, the handrail mount is sideways if we’re looking down; if we’re looking up, it makes sense.
Maybe it is a light fixture.
It’s at the top, I have that same bannister mount, it points upwards to the banister.
The mattress is wedged at the top of the stairs thanks to its extreme springiness.
Some stairs don’t have different looking risers, but you’re still correct because you can see wear marks from steps on the carpet.
It’s the top of the stairs because in the top left of thr image you can see the banister support. If the mattresses were at the bottom then the angle of that support would be different
Why is no one else talking about this.
There’s no debate. It’s at the top of the stairs.
when the mattress is at the top, where is gravity and on what is it resting?
It could be wedged.
You think a folded in half mattress could get stuck in a stairwell? You might be on to something!
I think it might actually be held up by the other end of that banister.
That’s what I was thinking too
You live in fancy houses!
I mean, it’s code for anything built during the age of home electricity.
Well, my house has electricity and the stairs do not have that indentation at all. I could take a picture of the steps from the bottom or the top and aside from the wear marks on the treads, you can’t see a difference.
built during
When was your home built?
Well after the beginning of the age of home electrification, but I’m not sure precisely. I’m renting my current house.
I don’t think any of my stairs have had such an exaggerated ledge of the tread like the picture in this thread. In my previous house (owned, built in 2000 something) it just had a little bump nailed on to the edge, but it was symmetric on both the tread and riser.
3/4" min to 1-1/4" max is code, with a 9/16" nosing. No nose is doable, but with a min step depth of 11", generally youre not seeing that outside of commercial spaces (and typically concrete).
Not sure where you are (or if your stairs are even up to code), but that’s what they are referring to.
Never lived in a house, only apartments with no stairs (inside the apartments) and this is obvious even to me. You can know something without ever having owned or lived with that thing.
its simply code where I live and my old home where I grew up was already old AF and had those risers and treads (albeit not as deep as they should have been, I always tripped)
I think it’s bottom too but I don’t agree with your reasoning, I’ve seen steps without that bit.
Edit: actually now I think top, I’ve been convinced by the daylight argument plus the realization that is a single mattress folded in half (I previously thought it’s two mattresses).
Edit: changed my mind again, made a top level comment
How does the single mattress in half bit make you think it’s at the top? If it were at the top, the force of the mattress trying to straighten itself out would push it down the stairs. Much more likely the mattress was pushed/ tossed/ fell down the stairs and got folded in that position, imo.
Edit: the shadows are also indicative of it being at the bottom: light source from above and and from the sides at the base of the stairs, either from an open door or window. Shadow cast from the door light source being cancelled by the light source from above the stairs.
Back when I thought it was two mattresses, I thought it couldn’t be at the top because the right mattress probably wouldn’t be held up like that. But since it’s one mattress, it can relatively easily be held at that angle with most of its weight resting on the step.
And that’s my main reason: it really seems like the mattress is being pushed towards that step, and I believe it’s being pushed by gravity. Doesn’t make as much sense for it to be pushed in that direction by someone.
I’m not married to it though, it’s a really tricky picture.
I’m not gonna lie, you’ve got me rethinking my position pointing out the right side of it. I do think though, that if it were at the top and resting on the one step, that the corner of the mattress resting on the step would be bowed in a bit more.
It is quite tricky.
Yeah. I’ve now found a reason that makes me convinced the mattress is at the bottom. I made a top level comment about it.
agreed
deleted by creator
Thought something was weird here. The contrast and colour is making it difficult. If you turn up shadows it changes the entire feeling, including where the obvious light source is. I wouldn’t expect the dark side of the mattress unless there was a bright light directly above it.
Also the banister/handrail arm wouldn’t be horizontal. Most importantly, congrats, you got me invested.
No, the light could still be above the mattress on the ceiling at the bottom of the stairwell. This proves nothing.
But, the wear on the carpet indicates to me that those are the treads, so this is taken from the top of the stairs looking down. Also, not mentioned elsewhere, there is usually a nose on the treads and the carpet would follow the nose, which can’t be seen from above.
The biggest factor IMO is something no one mentioned yet: we can only see one face of each step (either the top or the wall). If a photo is taken from the bottom, we would almost always be able to see the tops of the first few steps, which isn’t visible here. If a photo is taken from the top, the walls would pretty much never be visible (if they were, you could also see the photographer’s feet).
Therefore, this photo is only consistent with a photo taken from the top.
It is possible that this is an extremely long flight of stairs or that the photo was taken from a deliberately deceptive angle, but if that’s the case I have to say it was expertly done, because I am CERTAIN that we are looking from the top and the mattress is at the bottom.
Nah, the hanger for the banister is very common, it protudes from the wall and turns up into the bottom of the handrail, therfore we are looking from the bottom up.
It’s going at an angle, not up. It’s 90° from the handrail itself, which is sloped to match the incline of the stairs.
Exactly right. The steps sit on the risers. If you can’t see both it’s from the top.
I have those stairs with that carpet.
💯% this is looking down to a mattress at the bottom of the stairs.
Conclusive evidence:
Looking Down
Looking Up
(Sorry I was too lazy to get the low perspective)
Not convinced. It’s a different set of stairs and a different carpet. I have had stairs with a carpet more similar to the OP that did not have a riser. See elsewhere in these comments for a photo of these stairs, now bare. In the distant past, they were carpeted.
I think they’re cheap stairs without the bullnose. Makes it way easier to carpet. By the looks of the trim this is not a fancy apartment. The lack of bullnose contributes to the optical illusion.
Bottom, we can see dust and debris accumulated on the “run” part of the steps.
And you don’t see the nosing of the steps.
From the wear patten on the carpet I would say bottom, but the handle to the side makes me think top !..
Could be a sconce instead of a weirdly placed handle.
It’s a curtain rod to a window midway up the stairs. We’re looking down a flight of steep older stairs. The mattress is lit by the window that is (mostly) under the rod, and by an open door at the bottom of the stairs.
The handrail probably has the hangers perpendicular to the railing instead of plumb to the ground. Just the cheapest ones you can get.
